Ordinary Discount Spiral Wound Gasket-CGI for Iran Manufacturer
Ordinary Discount Spiral Wound Gasket-CGI for Iran Manufacturer Detail:
Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
Feature
Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.
Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface
Easy installation and handy use.
Excellent Sealability
Products Type
Technical Data Sheet
|
Product&Type |
Size（mm） |
Temperature(℃) |
Pressure（Mpa） |
|
Spiral Wound Gasket filled with Graphite
|
φ16~φ3200 |
(In Oxidizing Environment )-240~+550℃；(In non-Oxidizing Environment)-240~+870℃ |
(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa |
|
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
|
Spiral Wound Gasket filled with PTFE
|
φ16~φ3200 |
-200~+250℃ |
15 |
Application Area
The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.
Product detail pictures:
Related Product Guide:
O-Ring Sizes for Industrial Applications
What Is A PTFE Ring Gasket?
Ordinary Discount Spiral Wound Gasket-CGI for Iran Manufacturer, The product will supply to all over the world, such as: , , ,
A4000 & Wrightlon® 5200 are high temperature, fluoropolymer release films that have excellent elongation and will conform easily to the most complex curvatures.
They are capable of cure temperatures up to 500°F (260°C). These films will release from most resin systems and will provide a glossy finish when used directly on the laminate.
All standard perforations are available. Please see our perforation table in the “Release Films” film section of the catalog.
Benefits:
• Excellent elongation and strength reduces bridging in corners, avoiding scrap or rework.
• High visibility colors reduce risk of FOD and leaving film on cured parts.
• Color options help differentiate perforation styles.
• Easy release off cured parts, leaving excellent finish.
• Widths up to 160 inches (4 m) without heat seams.
For more information, please visit: www.airtechonline.com
By from -
By from -
