2017 China New Design PTFE Packing with Aramid Corner to Czech Republic Factory
2017 China New Design PTFE Packing with Aramid Corner to Czech Republic Factory Detail:
PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
22m/s rotary |
||
|
Temperature |
-100℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
O-Ring Sizes for Industrial Applications
Useful Tips For Installing The Teflon Envelope Gasket
2017 China New Design PTFE Packing with Aramid Corner to Czech Republic Factory, The product will supply to all over the world, such as: , , ,
Shifts much better with 10W30 installed.
As usual it’s difficult to get oil back into the manual transmission without a proper pump. Jeep design makes it handy to just pour oil in with a longer hose while standing beside front fender.
Used a 90 degree fitting from Lowes that has a garden hose male to a small ~1/2″ male end. Seals into the garden hose female. Just pour in until oil starts dripping into catch pan below Jeep, re-install plug. Careful not to over tighten plug, just needs to be snug, the plug doesn’t fasten anything..
Visit out Store: https://www.taylor-tactical-supply.com Add me to your Google+ Circles:https://plus.google.com/+nictaylor00/posts Please join me on Facebook for …
By from -
By from -
