Trending Products PTFE Envelope EPDM Gasket to Sydney Factory

PTFE envelope EPDM gasket utilizing PTFE jacket have become popular for use in severely corrosive services because of its low min. Seating stress, excellent creep resistance, high deformability and choice of a variety of filler materials to assure optimum performance on any specific application.

Product Feature:

l Virtually 100% chemically resistance

l Temperature resistance: -200~+260℃

l Pressure resistance: 4Mpa

Application

PTFE envelope gaskets are widely used in food and process industrial where contamination of the medium can not be permitted. Suitable for medium strong alkalis, cryogenic fluids, oxygen, chlorine gas etc.

UHV viewports Conflat, ISO or KF sales@dmphotonics.com

Del Mar Photonics offer a range of competitively priced UHV viewports , Conflat, ISO or KF including a variety of coatings to enhance performance.
When you send us your inquiry please fill out the following form to indicate all important specifications and e-mail it to us with your inquiry.

Del Mar Photonics viewports are manufactured using advanced techniques for control of special and critical processes, including 100 percent helium leak testing and x-ray measurements for metallization control.

https://www.dmphotonics.com/Zinc-selenide-ZnSe-vacuum-viewport/vacuum-viewports-ZnSe.htm

Windows Materials include:
Fused silica, Quartz , Sapphire , MgF2, BaF2, CaF2, ZnSe, ZnS, Ge, Si, Pyrex

Coating – a range of custom coatings can applied – which include
- Single QWOT
- Broad Band AR
- V coatings
- ITO
- DLC (Diamond like coating)

A vacuum flange is a flange at the end of a tube used to connect vacuum chambers, tubing and vacuum pumps to each other. Vacuum flanges are used for scientific and industrial applications to allow various pieces of equipment to interact via physical connections and for vacuum maintenance, monitoring, and manipulation from outside a vacuum’s chamber. Several flange standards exist with differences in ultimate attainable pressure, size, and ease of attachment.

Vacuum flange types

KF/QF

A KF-25 tee, o-ring, and clamp.
The ISO standard quick release flange is known by the names Quick Flange (QF), Klein Flange (KF) or NW, sometimes also as DN. The KF designation has been adopted by ISO, DIN, and Pneurop. KF flanges are made with a chamfered back surface that are attached with a circular clamp and an elastomeric o-ring that is mounted in a metal centering ring. Standard sizes are indicated by the nominal inner diameter in millimeters for flanges 10 through 50 mm in diameter.

DN10KF
DN16KF
DN25KF
DN40KF
DN50KF

ISO
The ISO large flange standard is known as LF, LFB, MF or sometimes just ISO flange. As in KF-flanges, the flanges are joined by a centering ring and an elastomeric o-ring. An extra spring-loaded circular clamp is often used around the large diameter o-rings to prevent them from rolling off from the centering ring during mounting.

The ISO large flanges come in two varieties. The ISO-K (or ISO LF) flanges are joined with double claw clamps which clamp to a circular groove on the tubing side of the flange. The ISO-F (or ISO LFB) flanges have holes for attaching the two flanges with bolts. Two tubes with ISO-K and ISO-F flanges can be joined together by clamping the ISO-K side with single claw clamps which are then bolted to the holes on the ISO-F side.

ISO large flanges are available in sizes from 63 to 500 mm nominal tube diameter).[2]

DN63LF (63.5 mm)
DN100LF (102 mm)
DN160LF (160 mm)
DN200LF (200 mm)
DN250LF (254 mm)
DN320LF (316 mm)
DN400LF (400 mm)
DN500LF (500 mm)

CF (Conflat)

A 2¾ CF (conflat) full nipple with blank and OFHC copper gasket.

A 60 kV high voltage electrical feedthrough on a 4½ inch (or DN63) conflat flange
Several vacuum flange standards exist, and the same flange types are called by different names by different manufacturers and standards organizations. CF (ConFlat) flanges use a copper gasket and knife-edge flange to achieve an ultrahigh vacuum seal. The term “ConFlat” is a registered trademark of Varian, Inc., so “CF” is commonly used by other flange manufacturers. Each face of the two mating CF flanges has a knife edge which cuts into the softer metal gasket, providing an extremely leak-tight, metal-to-metal seal. Deformation of the metal gasket fills small defects in the flange, allowing Conflat flanges operate down to 10−13 torr (10−11 Pa) pressure. The knife edge is recessed in a groove in each flange. In addition to protecting the knife edge, the groove helps hold the gasket in place, which aligns the two flanges and also reduces gasket expansion during bake-out. For stainless steel conflat flanges baking temperatures of 450°C can be achieved; the temperature is limited by the choice of gasket material. CF flanges are sexless and interchangeable. In North America, flange sizes are given by flange outer diameter in inches while in Europe and Asia, sizes are given by tube inner diameter in millimeters. Despite the different naming conventions, the actual flanges are the same.

Featured applications:

Rotation-induced cooling of an optically-trapped micro-gyroscope in vacuum
Yoshihiko Arita, Michael Mazilu, Kishan Dholakia
6 February 2014 • 5:10 – 5:30 PM | Part of SPIE OPTO

Measurement of Auger effect and droop in LEDs by energy analysis of electron emission in vacuum
Claude Weisbuch, Jim Speck, Justin Iveland, J. Perretti, L. Martinelli, M. Piccardo
6 February 2014 • 9:00 – 9:30 AM | Part of SPIE OPTO

https://www.shopvelox.com/

Here at Shopvelox we are about producing great pinewood derby products for use by all levels of builders. We offer pinewood derby tools, wheels, axles, cars, and pinewood derby dry lubes. We even offer a dyno testing service were we run your car, time it and video tape it, and offer you suggestion on how to speed it up. All you pay for with the testing is shipping. So, if you are looking for dynamic speed products with a high level of craftsmanship let us help you out. Visit us at https://www.shopvelox.com/ for your pinewood derby needs. If you don’t see it let us know and we may be able to get it.

3 Wheel Racer
BSA Slots
1.5 gram wheels by derbydust.com
Quick Start Front End
0.90″ish COG
Lead Canopy
42″ ft besttrack at with custom 4x eyes timestopper timer. 26 degree ramp angle

Pinewood derby car built to go fast using graphite type lube.

https://www.derbydust.com for best graphite dry lube.

Pinewood derby car wheels axles hubs balanced car race grand prix wood lead tungsten graphite hobby paint lube blue and gold bobcat wolf bear webelos den pack bsa legal