OEM/ODM Manufacturer Serrated Gasket to Slovakia Factory

1.Structure

Serrated Gasket is made of machined flat metallic plate with waved or corrugated surface in 90 degree angle.

The Serrated Gasket with inner and outer rings or composite gasket attached with flexible graphite or Teflon sheet are available depending on the working location and requirement.

2.Characteristic

Serrated Gasket is an idea gasket used in low pre-tightening, the soft sealing surface avoid metal to metal touch, can be combined reliably and closely, protect flange not to be damaged. This kind of gasket is suitable to high pressure and high temperature location. Strong corrosion resistance, stable and reliable sealing function.

3.Gasket Typ

   Basic Type                                        With outer Ring

4. Working Environment

Working Temperature：~650℃

Working Pressure：6.4-16.0MP

Min. Pre-tightening：y=70MPa

**How to repair gas gauge: https://youtu.be/jivVH99ngYw?t=1s More of my How to on SeaDoo below:
Ok! Seadoo GTX Carbon Ring Floating Ring Bellows Drive shaft replace fix leak carbone. OK! Same instructions for all 1997 97 Seadoo (Except XP and HX ) SP SPX GS GSI GSX GTS GTI. Steps: 1. Remove the O-Ring or Half Metal Ring on the Floating Ring. 2. Loosen up the clamps holding bellows and carbon ring. 3. Remove the nuts and bolts for steering and reverse. 4. Remove the 4 nuts or screw for the impeller housing. 5. You can now pull the Imp housing and drive shaft and all… 6. Use the video as a guide.
Check your internal fuel too! See 2 more Seadoo video links below:
1. How to repair Seadoo Beepers: https://youtu.be/pY-G6IX08pU 2. How to repair gas gauge: https://youtu.be/jivVH99ngYw?t=1s
3. Clogged internal carb fuel filters. It was caused by the gray Tempo Fuel Lines. https://www.youtube.com/watch?v=0WdK7lTj