Professional factory selling Spiral Wound Gasket-R for Nicaragua Manufacturers
Professional factory selling Spiral Wound Gasket-R for Nicaragua Manufacturers Detail:
Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
Feature
Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.
Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface
Easy installation and handy use.
Excellent Sealability
Products Type
echnical Data Sheet
|
Product&Type |
Size（mm） |
Temperature(℃) |
Pressure（Mpa） |
|
Spiral Wound Gasket filled with Graphite
|
φ16~φ3200 |
(In Oxidizing Environment )-240~+550℃；(In non-Oxidizing Environment)-240~+870℃ |
(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa |
|
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
|
Spiral Wound Gasket filled with PTFE
|
φ16~φ3200 |
-200~+250℃ |
15 |
Application Area
The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.
Product detail pictures:
Related Product Guide:
O-Ring Sizes for Industrial Applications
Comparison of O-Ring Materials
Professional factory selling Spiral Wound Gasket-R for Nicaragua Manufacturers, The product will supply to all over the world, such as: , , ,
https://www.watercannon.com/seesearch.aspx?SearchTerm=o-rings
https://www.watercannon.com/c-238-quick-connects.aspx
Water Cannon carries quick connects composed of stainless steel, brass and zinc, among other durable materials.
1800.226.2646
espanol: 1800.917.9274
https://www.officezone.com/aiehandc.htm – Hand sealers, sometimes called handheld bag sealers, are great to have for packaging and sealing plastic bags. What do you do if you bag has excess plastic? If you have a standard hand sealer, you have to cut it off using scissors. If you need to cut plastic off of a lot of bags throughout the day, scissors can be tedious. This is why you need to use a handheld bag sealer with a build in cutter. These AIE hand sealers all include a cutter and can be used to seal a wide variety of bags. These sealers range in sealing length from 8″ up to 16″ and produce sealing widths from 2mm up to 5mm, depending on the model. Using these handheld bag sealers is easy. Simply adjust the machine, place the open end of the bag into the sealer and pull the arm down. Once the sealing is complete, pull the cutter lever and slit off the excess plastic. These sealers are incredibly popular. Buy yours today!
By from -
By from -
