One of Hottest for PTFE Gasket to Moldova Factories
One of Hottest for PTFE Gasket to Moldova Factories Detail:
PTFE gasket is manufactured by molding method with PTFE granular resin. Compared with other plastic, PTFE has a superior properties against chemicals and temperature. Because of such excellent properties, PTFE gasket has a wide application as a sealing material.
Technical Data Sheet
| Property | Unit | Result |
| Density | g/cm3 | 2.18 |
| Elongation at Break | % | 200~450 |
| Tensile Strength | Mpa | 14~18 |
| Bending Strength | Mpa | No Break |
| Pressure Resistance | Mpa | 24 |
| Tensile Modulus | Mpa | 393 |
| Bending Modulus | Mpa | 490~586 |
| Working Temperature
(20000 hr, highest) |
℃ |
260 |
Application Area
As a sealing material, PTFE gaskets can be used in flange joint of various equipments and pipes in chemical industry, food producing industry, medicine industry and so on. It can bear the most bitter chemical medium, and has good anti-creeping performance. The unloaded operating temperature range is -180~+260℃.
Product detail pictures:
Related Product Guide:
O-Ring Sizes for Industrial Applications
A Look at the Molded Gasket
One of Hottest for PTFE Gasket to Moldova Factories, The product will supply to all over the world, such as: , , ,
CM, CME (MG, MGE 71, 80, 90, 100 and 132)
Table of contents:
Dismantling:
00:00 Removing the motor flange
01:11 Removing the diverting disc, o-ring and bearing cover plate
01:33 Removing fan cover, fan and the seal ring
02:24 Removing the rotor
Assembly:
02:55 Fitting the rotor
03:09 Fitting fan cover, fan and the seal ring
04:38 Fitting the diverting disc, o-ring and bearing cover plate
04:58 Fitting the motor flange
Recorded: July 2009
For more information please visit:
https://www.grundfos.com/service-support.html
By from -
By from -
