China Manufacturer for PTFE Graphite Packing with Aramid Corner Export to Mali
China Manufacturer for PTFE Graphite Packing with Aramid Corner Export to Mali Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
20m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
A Look at the Molded Gasket
China Manufacturer for PTFE Graphite Packing with Aramid Corner Export to Mali, The product will supply to all over the world, such as: , , ,
Just a simple fix I came up with the end the factory built in leak on the drive side of a 4 speed transmission.
Thanks to TBear for the T shirt.
Here’s the link to the drawing in .pdf format. Its not to scale but its pretty straight forward.
https://www.celticthunder.net/TransSeal.pdf
Here’s the O-rings I got from McMaster Carr.
https://www.mcmaster.com/#9464k291/=eaxx08
saddlebagrail from Shovelhead.us is now selling these on eBay.
They are $53 and well worth it.
https://www.ebay.com/usr/saddlebagrail?_trksid=p2047675.l2559
The story of this build,
https://www.celticthunder.net
By from -
By from -
