2017 wholesale price PTFE Graphite Braided Packing to Salt Lake City Importers
2017 wholesale price PTFE Graphite Braided Packing to Salt Lake City Importers Detail:
It is a braided packing made of PTFE yarn containing graphite. It is recommended for shafts for almost all chemicals. Stability and long service lift are achieved by low friction coefficient. It has great tear strength and high thermal conductivity. This self lubrication packing does not score the shaft and minimizes sleeve rep, acement cost. It can be used to seal alkalis, solvents, water, steam, acids except strong oxidizing acids( aqua regia, fuming nitric acid, fuming nitric acid, fuming sulfuric acid,etc.) for centrifugal pumps, autoclaes, agitators mixers, etc.
Technical Data Sheet
|
Rotating |
Reciprocating |
Valves |
Pressure |
2Mpa |
15Mpa |
15Mpa |
Shaft Speed |
14m/s rotary |
||
Temperature |
-200℃~+280℃ |
||
PH Range |
0~14 |
Application Area
It can be used to seal alkalis, solvents, water, steam, for centrifugal pumps, autoclaves, agitators, mixers, etc.
Product detail pictures:
Related Product Guide:
What Is A PTFE Ring Gasket?
A Look at the Molded Gasket
2017 wholesale price PTFE Graphite Braided Packing to Salt Lake City Importers, The product will supply to all over the world, such as: , , ,
The automatic tape machine applies a double-sided, self-adhesive tape on tubes for (roller) blinds. Positional control allows the distance between the tube end and the tape to be specified precisely at both ends in order to match the tape position with the fabric width and position. This prevents pollution at the tube ends caused by exposed tape.
The tube taping machine can be made compatible with multiple tube diameters, and switching between the diameters is very simple. The tube tape machine featured in the video is suitable for different tape widths, and uses a jumbo tape roll dispenser. The machine includes a feeding tray for tubes, and a collection crate in which the tubes are ejected. The operator sets the system to the correct tube diameter and only needs to place the tubes in the loading system. During transport, the tubes are de-greased using a solvent dispenser and wiping system, followed by the actual application of the tape. Transport, cleaning, taping and ejecting are done fully automatic.
By from -
By from -