OEM Customized wholesale Carbon Fiber Packing Impregnated with PTFE to Mauritius Importers

Diagonal braided to form a dense but pliable packing, each carbon fiber is pre-impregnated with PTFE, and re-impregnated during square braided. It is premium service packing for media of weak chemical corrosion and grains of particles exit.

Technical Data Sheet

 Application Area

Resist all the strong corrosive media and media with a few crystal particles with the exception of the strong oxidizing agent polonium, chiefly used for the sealing of the centrifugal pump, column pump, mixer and valves.

Toolfusion® 3 is a two part low viscosity epoxy infusion resin formulated to produce pre-preg quality, composite moulds. Toolfusion® 3 has a low initial cure temperature of 120ºF (49ºC) and can be post cured to achieve a high glass transition temperature of 425ºF (218ºC). Void contents of less than 1% are achievable. Toolfusion® 3 will work in various RTM and VARTM processes including single and double bag arrangements to produce autoclave quality laminates.

Benefits:
• Resin infusion process delivers very high quality laminates with low manufacturing costs, no refrigeration costs, no autoclave running costs.
• Low initial cure temperature for low thermal expansion effect during curing and ability to use low cost master model materials.
• Nano technology delivers outstanding toughness & high Tg. (218ºC) for long tool life and reduced life cycle cost.
• Low viscosity allows infusion of thicker and more complex laminates with fewer resin feed lines.
• In comparison to metallic tools, Toolfusion® 3 composite tools are lighter weight for easier manual handing.
• In comparison to metallic tooling, Toolfusion® 3 composite tools have faster heat up and cool down rates for reduced production costs.
• Toolfusion® 3 composite tooling laminates have vacuum integrity for vacuum bag processing of parts in oven and autoclave.

For more information, please visit: www.airtechonline.com