High Quality Industrial Factory Spiral Wound Gasket-RIR for Portugal Importers
High Quality Industrial Factory Spiral Wound Gasket-RIR for Portugal Importers Detail:
Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
Feature
Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.
Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface
Easy installation and handy use.
Excellent Sealability
Products Type
Technical Data Sheet
|
Product&Type |
Size（mm） |
Temperature(℃) |
Pressure（Mpa） |
|
Spiral Wound Gasket filled with Graphite
|
φ16~φ3200 |
(In Oxidizing Environment )-240~+550℃；(In non-Oxidizing Environment)-240~+870℃ |
(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa |
|
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
|
Spiral Wound Gasket filled with PTFE
|
φ16~φ3200 |
-200~+250℃ |
15 |
Application Area
The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
O-Ring Sizes for Industrial Applications
High Quality Industrial Factory Spiral Wound Gasket-RIR for Portugal Importers, The product will supply to all over the world, such as: , , ,
https://www.kingsbodyjewelry.com
Another common problem is inserting and removing large gauge captive bead rings and segment rings. Once you get rings that are around 8 or 6 gauge you physically won’t be able to get them in and out without tools (unless the jewelry is spring loaded). Its kind of difficult the 1st few times but with a little practice you will be throwing those rings in and out in no time.
If you have any questions feel free to hit me up, I would be glad to help, and check out our website if you are interested in some awesome captive bead rings, segment rings, plugs, and body jewelry. Talk to you soon.
chris
https://www.sealmaster.com
At Seal Master we take pride in our products and stand by their quality. Each Seal Master product is inspected a minimum of two times prior to shipment by two separate Seal Master Quality inspectors. During this process inspectors are looking for obvious cosmetic defects but are also trained to be aware of other problems that may occur during operation. Below are examples of some inspection processes that take place prior to shipment.
By from -
By from -
