Good quality 100% PTFE Gasket to California Factories

Short Description:

PTFE gasket is manufactured by molding method with PTFE granular resin. Compared with other plastic, PTFE has a superior properties against chemicals and temperature. Because of such excellent properties, PTFE gasket has a wide application as a sealing material. Technical Data Sheet Property Unit Result Density g/cm3 2.18 Elongation at Break % 200~450 Tensile Strength Mpa 14~18 Bending Strength Mpa No Break Pressure Resistance Mpa 24 Tensile Modulus Mpa 393 Bending Modulus ...


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Good quality 100% PTFE Gasket to California Factories Detail:

PTFE gasket is manufactured by molding method with PTFE granular resin. Compared with other plastic, PTFE has a superior properties against chemicals and temperature. Because of such excellent properties, PTFE gasket has a wide application as a sealing material.

Technical Data Sheet

Property Unit Result
Density g/cm3 2.18
Elongation at Break % 200~450
Tensile Strength Mpa 14~18
Bending Strength Mpa No Break
Pressure Resistance Mpa 24
Tensile Modulus Mpa 393
Bending Modulus Mpa 490~586
Working Temperature

(20000 hr, highest)

260

Application Area

As a sealing material, PTFE gaskets can be used in flange joint of various equipments and pipes in chemical industry, food producing industry, medicine industry and so on. It can bear the most bitter chemical medium, and has good anti-creeping performance. The unloaded operating temperature range is -180~+260℃.


Product detail pictures:

Good quality 100%
 PTFE Gasket to California Factories detail pictures


Related Product Guide:
Useful Tips For Installing The Teflon Envelope Gasket
O-Ring Sizes for Industrial Applications

Good quality 100% PTFE Gasket to California Factories, The product will supply to all over the world, such as: , , ,


  • HUBS ARE A WEAK LINK IN THE FRONT SUSPENSION OF THE FORD POWERSTROKE. LOTS OF OFFROADING, BIG TIRES AND THE HEAVY DIESEL ENGINE CAN SHORTEN THE LIFE OF THE HUB.



    https://www.BobsPlumbingVideos.com

    In this video I go over the steps in replacing Delta style stems and seats. When these showed up in the market place they were marketed as “washer-less faucets”. Well they don’t have your typical flat or beveled washer held in place by a bib screw but the little cup down inside the recess is rubber and it sits up against the bottom stainless steel seat of the stem, WASHER-LESS? You decide!

    For more about the tools and gear I use in these videos and in my plumbing business, head on over to the gear store at-https://www.bpvgear.com

    Happy Plumbing
    Bob


    5 Stars By from -

    5 Stars By from -

    Related Products