High quality factory PTFE Graphite Braided Packing for Lahore Factories

It is a braided packing made of PTFE yarn containing graphite. It is recommended for shafts for almost all chemicals. Stability and long service lift are achieved by low friction coefficient. It has great tear strength and high thermal conductivity. This self lubrication packing does not score the shaft and minimizes sleeve rep, acement cost. It can be used to seal alkalis, solvents, water, steam, acids except strong oxidizing acids( aqua regia, fuming nitric acid, fuming nitric acid, fuming sulfuric acid,etc.) for centrifugal pumps, autoclaes, agitators mixers, etc.

Technical Data Sheet

 Application Area

It can be used to seal alkalis, solvents, water, steam, for centrifugal pumps, autoclaves, agitators, mixers, etc.

A&M HW100 fill valve leak repair.

If you have a leaky cylinder you should contact A&M, who should repair it under warranty.

If you find your A&M cylinder is leaking from the fill port then you can either replace the O ring on the little plunger inside the valve or you can convert it to a simple M10* countersunk bolt with an O ring seal. The O rings and bolts can be bought on eBay or your local DIY store.

*It has come to my attention that A&M use a number of different sizes of bolts in their fill valves so you will need to measure yours to make sure you are buying the correct size bolt and O ring.
www.xtxair.com

If you have a leaky cylinder you should contact A&M, who should repair it under warranty.