Wholesale Price China NBR O-Ring for Chile Factories

Short Description:

Nitrile rubber (NBR, Buna-N) provides excellent resistance to petroleum oils as well as mineral and vegetable oil. Nitrile rubber also offers strong resistance to heat aging – often a key advantage over natural rubber. Technical Data Sheet Color Black or Color Material Nitrile(NBR) Hardness(Shore A) 65~75 Temperature(℃) -30~+120 Tensile Strength(Mpa) 14 Elongation at Break(%) 384 Density(g/cm3) 1.2   Application Area Nitrile rubber performs well in carburetor and fuel...


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Wholesale Price China NBR O-Ring for Chile Factories Detail:

Nitrile rubber (NBR, Buna-N) provides excellent resistance to petroleum oils as well as mineral and vegetable oil. Nitrile rubber also offers strong resistance to heat aging – often a key advantage over natural rubber.

Technical Data Sheet

Color Black or Color
Material Nitrile(NBR)
Hardness(Shore A) 65~75
Temperature(℃) -30~+120
Tensile Strength(Mpa) 14
Elongation at Break(%) 384
Density(g/cm3) 1.2

 

Application Area

Nitrile rubber performs well in carburetor and fuel pump diaphragms, aircraft hoses, seals and gaskets as well as oil-lined tubing. Due to its versatility, nitrile is used in applications involving not only oil and fuel resistance, but those applications requiring resistance to heat, abrasion, water, and gas permeability.


Product detail pictures:

Wholesale Price China
 NBR O-Ring for Chile Factories detail pictures


Related Product Guide:
Useful Tips For Installing The Teflon Envelope Gasket
Comparison of O-Ring Materials

Wholesale Price China NBR O-Ring for Chile Factories, The product will supply to all over the world, such as: , , ,


  • After i got done siliconing and painting my box, I figured I’ll make a ‘How to’ video on sealing the gap between the subwoofer and the box. My total cost out of pocket to just seal the gap was less $15 after tax. But prices may vary depending on the hardware store that’s nearest to you.

    There was a couple of things I forgot to mention in the video. When you you apply the weather stripping, make sure the surface area is clean and free of any dust. Second, and most important, once you have the mounting hole of the sub lined up with mounting holes, DON’T put a lot of presseure when tightening the screws. Put to much pressure and you’ll push the t-nut out of it’s place. Happened to me twice, hahaha!

    So, yeah, just put enough pressure to let the screw tighten. Then once it’s tight, you can torque down the screw tight enough so it won’t come loose.

    Thanks for watching my vid, and please rate.

    mastagoof


    5 Stars By from -

    5 Stars By from -

    Related Products