factory wholesale good quality PTFE Packing with Aramid Corner for Swiss Manufacturer
factory wholesale good quality PTFE Packing with Aramid Corner for Swiss Manufacturer Detail:
PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.
Technical Data Sheet
|
Rotating |
Reciprocating |
Valves |
Pressure |
4Mpa |
15Mpa |
25Mpa |
Shaft Speed |
22m/s rotary |
||
Temperature |
-100℃~+280℃ |
||
PH Range |
2~12 |
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
Comparison of O-Ring Materials
factory wholesale good quality PTFE Packing with Aramid Corner for Swiss Manufacturer, The product will supply to all over the world, such as: , , ,
To purchase https://www.codythecarguy.com/store/product/ford-7-3-nozzles/
I broke down a injector so you can see the working parts and how the new nozzle goes on it. Also o-rings replacement and how the solenoid goes on it. These injectors have a mini p&b in them also known as the plunger that moves the fuel through the metering valve
https://www.codythecarguy.com/store/product/7-3-injector/
https://www.codythecarguy.com/store/product/ford-7-3-nozzles/
Substitution of mechanical seal, O-ring, screws and spacers on Lowara e-HM close coupled stainless steel impellers. Valid for e-HM models: 1HM, 3HM, 5HM up to 6 stages.
For more information: https://lowara.xylemappliedwater.com/brands/lowara/multistage-pumps/e-hm/
The content of this video is a guide and must be installed by a qualified person in accordance with all relevant local Electrical and Water Supply Regulations.
By from -
By from -