Professional factory selling Spiral Wound Gasket-R for Nicaragua Manufacturers
Professional factory selling Spiral Wound Gasket-R for Nicaragua Manufacturers Detail:
Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
Feature
Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.
Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface
Easy installation and handy use.
Excellent Sealability
Products Type
echnical Data Sheet
|
Product&Type |
Size（mm） |
Temperature(℃) |
Pressure（Mpa） |
|
Spiral Wound Gasket filled with Graphite
|
φ16~φ3200 |
(In Oxidizing Environment )-240~+550℃；(In non-Oxidizing Environment)-240~+870℃ |
(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa |
|
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
|
Spiral Wound Gasket filled with PTFE
|
φ16~φ3200 |
-200~+250℃ |
15 |
Application Area
The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
Comparison of O-Ring Materials
Professional factory selling Spiral Wound Gasket-R for Nicaragua Manufacturers, The product will supply to all over the world, such as: , , ,
If your car’s A/C is low on refrigerant and blowing hot air, that means the system, by definition, has a leak somewhere. You can add more refrigerant, but that refrigerant won’t last unless you seal the leak.
Super Seal is the fast, easy, inexpensive way to seal small A/C leaks yourself. A single can seals leaks in both the metal and rubber components of the air conditioning system, without the expense of replacing parts.
Using Super Seal is simple:
1. Locate the low-pressure port on your car A/C system. For help in finding the port on your vehicle, visit our online port locator: https://bit.ly/R1npRR
2. Attach the hose to the Super Seal can.
3. Start the engine and set the A/C and fan to maximum.
4. Connect the hose coupler to the low-pressure port.
5. Dispense the can’s contents into the A/C system.
6. Add R-134a refrigerant to recharge the system.
7. Allow the air conditioner to run for 15 minutes to circulate the Super Seal throughout the system.
Have questions? Ask the pro: https://bit.ly/1e8xjep
R-134a Super Seal can be found on the shelves of most auto parts stores. To find the nearest location, type your zip code into our store locator: https://bit.ly/1qgX12n
By from -
By from -
