Low MOQ for Spiral Wound Gasket-CGI Supply to Turkmenistan
Low MOQ for Spiral Wound Gasket-CGI Supply to Turkmenistan Detail:
Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
Feature
Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.
Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface
Easy installation and handy use.
Excellent Sealability
Products Type
Technical Data Sheet
Product&Type |
Size(mm) |
Temperature(℃) |
Pressure(Mpa) |
Spiral Wound Gasket filled with Graphite
|
φ16~φ3200 |
(In Oxidizing Environment )-240~+550℃;(In non-Oxidizing Environment)-240~+870℃ |
(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa |
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
Spiral Wound Gasket filled with PTFE
|
φ16~φ3200 |
-200~+250℃ |
15 |
Application Area
The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.
Product detail pictures:
Related Product Guide:
O-Ring Sizes for Industrial Applications
Useful Tips For Installing The Teflon Envelope Gasket
Low MOQ for Spiral Wound Gasket-CGI Supply to Turkmenistan, The product will supply to all over the world, such as: , , ,
Introduction to the roll forming process.
(Hot Rolling: https://youtu.be/AuuP8L-WppI)
Steel Master Programme
The Master’s Programme in Metal Forming and Surface Technology is open to students with different backgrounds in materials, processes and applications. The programme is designed for students who are interested in continuing to doctoral studies and/or working as project leaders in industrial R&D within the steel industry or in various manufacturing industries.
The Programme has a strong focus on materials, advanced forming processes, surface technology, modelling and simulations, which includes sheet metal forming, the role of the materials in plastic forming operations, micro-structure developments and tribology in metal forming processes.
Watch more from Dalarna University on https://www.youtube.com/dalarnauniversity
or download on https://itunes.du.se
By from -
By from -