High Efficiency Factory PTFE Graphite Packing with Aramid Corner to Bangalore Manufacturer
High Efficiency Factory PTFE Graphite Packing with Aramid Corner to Bangalore Manufacturer Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
20m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
Useful Tips For Installing The Teflon Envelope Gasket
A Look at the Molded Gasket
High Efficiency Factory PTFE Graphite Packing with Aramid Corner to Bangalore Manufacturer, The product will supply to all over the world, such as: , , ,
How to Replace O-rings of the PLEXOR digital manometer connection when a leak has been detected
Flat faced design
Zero leakage
Schedule 40, 80,160, or XXH
End weld preps machined to match mating pipe
All HART Industrial Unions are precision machined
Viton O-Ring standard, Buna N, Teflon, EPDM, Neoprene available -call for compatibility
Wrench flats – both ends
By from -
By from -
