Factory best selling PTFE Graphite Braided Packing for Chile Importers

It is a braided packing made of PTFE yarn containing graphite. It is recommended for shafts for almost all chemicals. Stability and long service lift are achieved by low friction coefficient. It has great tear strength and high thermal conductivity. This self lubrication packing does not score the shaft and minimizes sleeve rep, acement cost. It can be used to seal alkalis, solvents, water, steam, acids except strong oxidizing acids( aqua regia, fuming nitric acid, fuming nitric acid, fuming sulfuric acid,etc.) for centrifugal pumps, autoclaes, agitators mixers, etc.

Technical Data Sheet

 Application Area

It can be used to seal alkalis, solvents, water, steam, for centrifugal pumps, autoclaves, agitators, mixers, etc.

https://www.durafix.com.mx Soldar aluminio ahora es mas facil que nunca! desde una lata hasta una placa, solo requieres un soplete de gas propano, mapp, acetileno etc. en segundos podras soldar piezas de aluminio, cobre, bronce, lamina galvanizada.

Durafix, crea una fuerte union mas resistente que el metal base, libre de porosidades y residuos, con ua apariencia similar al aluminio, no requiere fundente ni el uso de gases o maquinas especiales.
============================
Tensile Strength, lbs/sq. in.=47,000
Compression Strengt, lbs/sq. in.=60,000 – 75,000
Shear Strengt, lbs/sq. in.= 34,000
Charpy Impact Str, lbs/sq. in.= 4 ft/lb to break 1/4″ bar
Hardness (Brinell)= 100
Ductility Good= Good
Melting Point= 732°F – 390°C
Specific Gravity = 6.7
Density (lbs/cu. in.)= 0.25
Elongation (in 2″)= 3%
Coefficient of Linear Expansion= 15.4×10-6/°F
Electrical Conductivity= 24.9% of Cu
Thermal Conductivity= 0.24 cal/cu.cm/°C
============================
Entrega inmediata en todo Mexico.

============================
Music track: Adam Michaels Is There Anybody Out There
Powered by Freeplay Music

Product Description:

Hart Industrial O-ring Unions are engineered to provide 3000 lb. service and are the most popular union in the industry for general purpose applications. The flat face design provides turbulence free fit across seats. This design is ideal where piping requirements dictate the necessity of having a flat face seal to make and break the pipe line. All HART Unions are made in the USA.

Standard O-Ring Union Features:

•Turbulence Free: All unions provide a turbulence-free fit across the seats

•O-Ring Isolation: The O-Ring seal is strategically located in the thread piece face eliminating O-Ring media contact and added protection against abrasives and erosion.

•Precision Machined components: All unions are precision machined to provide high quality and fail-safe leak proof reliability.

•Interchangeable End Connections: Threaded, socket weld, and butt-weld ends are interchangeable. This feature reduces overall costs by eliminating unnecessary nipples, bushings, couplings and inserts.

•Material Versatility: Unions can be provided in all standard metals or combination of metals. This includes 304 Stainless, 316 Stainless, A 105 Carbon Steel, Brass, Monel 400, Hastalloy, and Titanium.

•Excellent vibration resistance: Seals will not loosen, even under extreme pressure and pressure surges.

•No maintenance: Once initial seal is made, no further tightening required.