Popular Design for PTFE Graphite Packing with Aramid Corner Supply to Latvia
Popular Design for PTFE Graphite Packing with Aramid Corner Supply to Latvia Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
20m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
A Look at the Molded Gasket
Popular Design for PTFE Graphite Packing with Aramid Corner Supply to Latvia, The product will supply to all over the world, such as: , , ,
=Features of Proportional Diaphragm Valve=
• Has a very high chemical resistance due to all PTFE wetted parts.
• Flow controllable by changing the input voltage.
• Has a comparatively large orifice diameter of 4 mm, which can cover a wide range of flows.
The Takasago’s Proportional Diaphragm Valve can be seen at the following link.
https://www.takasago-fluidics.com/products_valve/diaphragm/NPV/.
#Subscribe to my channels and get more product information#
https://www.youtube.com/channel/UCYYBVDTT2ewI7wIhjzrpwhw
================================
Takasago Fluidic Sytems
E-mail: info@takasago-elec.co.jp
Web: https://www.takasago-fluidics.com/
By from -
By from -
