OEM/ODM Supplier for Expanded PTFE Tape for Stuttgart Factory
OEM/ODM Supplier for Expanded PTFE Tape for Stuttgart Factory Detail:
Expanded PTFE sealant tape possesses all the properties of PTFE, resistant to all the corrosive media.
Soft, twistable and bendable at will. Even if gravely rusted and worn out sealing face, as long as it is used, the equipment units may continue their service and the sealing can keep its best performance.
Excellent anti-wriggle variation ability and cold current resistance. Even in case of cross change of temperature and pressure, good sealing can be assured.
l Easy use and replacement
l Wide service scope.
Technical Data Sheet
|
No.
|
Project |
Technical Indexes |
|
1 |
PH Range |
0-14 |
|
2 |
Density |
0.7-0.8g/cm3 |
|
3 |
Temperature resistance |
-260-+260℃ |
|
4 |
High pressure resistance |
20~25Mpa |
|
5 |
Elongation |
20~30% |
|
6 |
Tensile strength |
30~35Mpa |
Regular Size
|
NO. |
SIZE |
NO. |
SIZE |
|
1 |
3mm*1.5mm*30m |
15 |
16mm*4mm*10m |
|
2 |
3mm*2mm*30m |
16 |
20mm*3mm*5m |
|
3 |
6mm*3mm*20m |
17 |
20mm*4mm*5m |
|
4 |
7mm*2.5mm*20m |
18 |
20mm*5mm*5m |
|
5 |
9mm*3mm*15m |
19 |
20mm*7mm*5m |
|
6 |
9mm*4mm*15m |
20 |
25mm*4mm*5m |
|
7 |
10mm*3mm*10m |
21 |
25mm*5mm*5m |
|
8 |
10mm*4mm*10m |
22 |
25mm*8mm*5m |
|
9 |
10mm*5mm*10m |
23 |
25mm*10mm*5m |
|
10 |
12mm*3mm*10m |
24 |
30mm*3mm*5m |
|
11 |
12mm*4mm*10m |
25 |
30mm*4mm*5m |
|
12 |
12mm*5mm*10m |
26 |
40mm*4mm*5m |
|
13 |
12mm*6mm*10m |
27 |
50mm*4mm*5m |
|
14 |
14mm*5mm*10m |
28 |
100mm*0.5mm*10m |
Application Area
It can be widely used in diverse pipelines to seal flanges, enameled products, glass, rubber products, plastics, non-rusting graphite lining tower, heat exchanger, pressure container as linings and to seal their flanges, to seal the fillers of diverse pumps and valves and to seal much heavy-calibre flanges which are not so precise, have larger unflat area and irregular shapes and require not too large tighting force.
Product detail pictures:

Related Product Guide:
Comparison of O-Ring Materials
Useful Tips For Installing The Teflon Envelope Gasket
OEM/ODM Supplier for Expanded PTFE Tape for Stuttgart Factory, The product will supply to all over the world, such as: , , ,
Mechanics-eye-view how to replace the power steering pump on a Gen 1 MINI Cooper. Intermittent or failed steering? Out of warranty? Buy parts and install yourself! Have fun by working on your own MINI Cooper!
Procedure is exactly as shown in this video for all 2002-2006 Coopers and Cooper S hardtops and 2004-2008 Cabriolets.
MINI USA offered an extended 13 year / 150,000 mile warranty for the following cars. If your car is not in this range, you’re out of luck, but you can save money by doing it yourself!
Buy a replacement pump here:
Remanufactured, no core required:
https://amzn.to/1tPcMT3
Remanufactured, get a refund for core return:
https://amzn.to/1wMfda2
MINI USA offered an extended 13 year / 130,000 mile warranty for 2002-05 MINI Cooper and Cooper S vehicles and model year 2005 Cooper Convertible and Cooper S Convertible vehicles. Check with your MINI dealer for covered VIN ranges.
If your car is not in this range, it’s not covered by warranty, but you can still save money by doing it yourself!
Remember to pick up a hose clamp and CHS-11 power steering fluid before starting this job!
Tools required:
13mm socket and wrench
10mm socket / wrench
T40 socket
Screwdriver
Jack and jack stands
That’s it!
“DIY MINI Cooper repair videos provided for reference/entertainment purposes only. Only work on your car if you have the right tools and are comfortable doing so. If in doubt, consult a professional. Mod MINI is not responsible for any ‘mistakes’ or ‘incidents’ arising out of your working on your own vehicle. Have fun and stay safe!”
Follow #ModMINI on Twitter to get notified of new video uploads! https://twitter.com/ModMINIYoutube Thanks for watching!
Want to show your support for MOD Mini? Go to the channel page (https://www.youtube.com/user/khammo01) and click on the support button! Or, click here for Mod MINI Amazon Registry!
https://amzn.com/w/2PKRFN62X0RP8
Can’t find a replacement for that torn ribbon cable; don’t want to pay for a new one – solder splice the two bits – did you save them ?
PLEASE NOTE: In the making of this video my efforts were necessarily clumsy because I could not take advantage of any magnification directly, especially using the microscope; I had to concentrate on aligning the cam to get a picture, so I was constrained to watching the screen of the VCR, it being too low resolution for productive effort. I would like to have used an eyepiece adaptor that fits both the camcorder and the ‘scope; then I should have been able to peer through the other eyepiece. So be assured it is a great deal easier than I make it look here. I have to admit that relatively few people have access to a stereo microscope; I paid around £180 ( ebay ) for this Russian made Lomo MBC-10, so at least it has been useful apart from being a toy.
I use a Yihua [ goes under several trade names ] workstation that has a heater blower – like a hair drier but hotter and more concentrated flow of air – and a soldering iron that has, as an accessory, a very fine, needle point bit, allowing you to make a good job of such tiny amounts of solder, almost too small to see with the naked eye.
The VX1000 mic/remote/cp flexiboard cable is about 1cm wide; with only a “normal” fine point soldering bit 40 joints were made in the space of approx 0.9 sq cm. The much finer bit was/is available as an optional accessory.
See this video for demonstration of USB microscope: “ToddFun.com: USB Microscope Review”.
Mario Parodi [ Guitar ] plays:-
Albeniz: Rumores de la Caleta; SE-Op 165 – Malaguena
Brahms: Cradle Song Op 49 no 4
Debussy: Arabesca No 1; SB – Clair de lune





