Cheapest Factory PTFE Packing with Aramid Corner Supply to Ghana

PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.

Technical Data Sheet

 Application Area

It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.

The aim of tightening a compression joint is to create a gas tight joint without compressing the olive too tight on the pipe by over tightening the nut as this will restrict flow through the pipe as the pipe will have been made internally smaller.

GAS IT and FES Autogas Ltd do not accept any liability from users following this video or information we provide.

We highly recommend getting a GAS IT Trained Dealer or Qualified Gas engineer to check your installation and fitment of GAS IT parts prior to filling and using it with LPG/ Autogas.

Toolguard is a high temperature, extruded silicone that provides protection to the mold and the operator during transportation and handling. Toolguard can be permanently bonded to the mold edge using RTV silicone adhesive. The product is available in two sizes that cover most mold edge thickness.

For more information, please visit: www.airtechonline.com