High Efficiency Factory PTFE Gasket Wholesale to Morocco

Short Description:

PTFE gasket is manufactured by molding method with PTFE granular resin. Compared with other plastic, PTFE has a superior properties against chemicals and temperature. Because of such excellent properties, PTFE gasket has a wide application as a sealing material. Technical Data Sheet Property Unit Result Density g/cm3 2.18 Elongation at Break % 200~450 Tensile Strength Mpa 14~18 Bending Strength Mpa No Break Pressure Resistance Mpa 24 Tensile Modulus Mpa 393 Bending Modulus ...


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
High Efficiency Factory PTFE Gasket Wholesale to Morocco Detail:

PTFE gasket is manufactured by molding method with PTFE granular resin. Compared with other plastic, PTFE has a superior properties against chemicals and temperature. Because of such excellent properties, PTFE gasket has a wide application as a sealing material.

Technical Data Sheet

Property Unit Result
Density g/cm3 2.18
Elongation at Break % 200~450
Tensile Strength Mpa 14~18
Bending Strength Mpa No Break
Pressure Resistance Mpa 24
Tensile Modulus Mpa 393
Bending Modulus Mpa 490~586
Working Temperature

(20000 hr, highest)

260

Application Area

As a sealing material, PTFE gaskets can be used in flange joint of various equipments and pipes in chemical industry, food producing industry, medicine industry and so on. It can bear the most bitter chemical medium, and has good anti-creeping performance. The unloaded operating temperature range is -180~+260℃.


Product detail pictures:

High Efficiency Factory
 PTFE Gasket Wholesale to Morocco detail pictures


Related Product Guide:
What Is A PTFE Ring Gasket?
Comparison of O-Ring Materials

High Efficiency Factory PTFE Gasket Wholesale to Morocco, The product will supply to all over the world, such as: , , ,


  • This video shows you how to adjust a HuMa R-10 regulator and how to service it.
    Please ensure the regulator has been removed from the rifle before stripping it!

    The O rings are:
    Small piston O ring – 1.5mm cross section x 5.5mm internal diameter nitrile 70 shore (N70),
    Large piston O ring – 1.5mm cross section x 12.5mm internal diameter nitrile 70 shore (N70)
    Main body O ring – 2mm cross section x 12mm internal diameter nitrile 70 shore (N70),
    Small body O ring – 1.5mm cross section x 9mm internal diameter nitrile 70 shore (N70)
    Cap O ring – 1.5mm cross section x 17mm internal diameter nitrile 70 shore (N70),

    To purchase a HuMa regulator please visit the eShop on www.xtxair.com



    32 years in the trade has taught me a few things. A number of different ways to join plastic pipe together for the average home owner…most tools can be rented for the day….Please subscribe and have a great day.


    5 Stars By from -

    5 Stars By from -

    Related Products