2017 Latest Design PTFE Packing with Aramid Corner to Switzerland Factory
2017 Latest Design PTFE Packing with Aramid Corner to Switzerland Factory Detail:
PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
22m/s rotary |
||
|
Temperature |
-100℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
Comparison of O-Ring Materials
2017 Latest Design PTFE Packing with Aramid Corner to Switzerland Factory, The product will supply to all over the world, such as: , , ,
View a step-by-step tutorial on how to properly lubricate an LCI Super Lube axle hub with a grease gun. If water is present, grease appears old or contaminated or if there is an insufficient amount of grease, the axles can be greased using the procedure indicated in the video.
Professor Patricia Berger, UC Berkeley, keynote speech
By from -
By from -
