Factory Supplier for Aflas O-Ring to Oslo Factory
Factory Supplier for Aflas O-Ring to Oslo Factory Detail:
Aflas based synthetic rubber, reinforced with carbon black and peroxide cured. Has good rapid gas decompression(FGD) resistant properties, which making it suitable for many high pressure gas applications. Temperature capability for this type compound is +5~+200℃.
Technical Data Sheet
Properties | Units | Typical value |
Hardness | IRHD | 84 |
Tensile strength | MPa | 22 |
Elongation at break | % | 189 |
Modulus at50% elongation | MPa | 4 |
Modulus at100% elongation | MPa | 12 |
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
What Is A PTFE Ring Gasket?
Factory Supplier for Aflas O-Ring to Oslo Factory, The product will supply to all over the world, such as: , , ,
Have you been fighting a mystery creak, chirp, or other bizarre noise that can’t be tracked down? Watch BikeCo’s Joe Binatena go through the steps of correcting bearing interface. Take Joe’s advice and check the easy stuff first – but if you are still struggling to find the cause of your noise these steps may save you a lot of heartache, hours of searching, and potential damage on your frame.
This is the first in a series of videos touching on locating and theories on addressing mystery creaks.
By from -
By from -