2017 China New Design NBR O-Ring Wholesale to Algeria
2017 China New Design NBR O-Ring Wholesale to Algeria Detail:
Nitrile rubber (NBR, Buna-N) provides excellent resistance to petroleum oils as well as mineral and vegetable oil. Nitrile rubber also offers strong resistance to heat aging – often a key advantage over natural rubber.
Technical Data Sheet
| Color | Black or Color |
| Material | Nitrile(NBR) |
| Hardness(Shore A) | 65~75 |
| Temperature(℃） | -30~+120 |
| Tensile Strength(Mpa) | 14 |
| Elongation at Break(%) | 384 |
| Density(g/cm3) | 1.2 |
Application Area
Nitrile rubber performs well in carburetor and fuel pump diaphragms, aircraft hoses, seals and gaskets as well as oil-lined tubing. Due to its versatility, nitrile is used in applications involving not only oil and fuel resistance, but those applications requiring resistance to heat, abrasion, water, and gas permeability.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
Useful Tips For Installing The Teflon Envelope Gasket
2017 China New Design NBR O-Ring Wholesale to Algeria, The product will supply to all over the world, such as: , , ,
Visit https://parts.rheem.com to buy manufacturer authorized parts for Rheem, Ruud, Richmond, Marathon, Eclipse, Vanguard, Hotpoint and General Electric (GE) water heaters. We also offer many universal parts designed to fit most other brands of water heaters.
Changing the anode rod every four years is a great way to extend the life of your water heater. The anode rod is a special metal component that’s meant to slowly dissolve so that the tank itself doesn’t corrode. When the anode rod is depleted, it no longer offers corrosion protection for the tank. To avoid tank damage, it’s best to replace the rod before that happens.
We offer anodes made from magnesium and aluminum, available in various lengths. Aluminum rods are available where sulfur odor or “rotten eggs smell” is a problem. Flexible rods are available where overhead space is tight for installation.
This video shows detailed step-by-step procedure for how to replace an anode rod on a gas or electric hot water heater.
Tools you’ll need
A ratchet wrench
A 1 1/16-inch socket
A 24” cheater bar or pipe
A Flat Blade Screwdriver
Teflon tape
A 2-gallon bucket
Hack saw
WARNING: For your safety, be sure to carefully read and understand the manufacturer’s Use and Care Manual, in its entirety, prior to operating, repairing or adjusting the water heater. Failure to do so may result in fire or explosion, electric shock, property damage, personal injury, or loss of life. If you do not understand these instruction or any terms within them, please contact a qualified service professional. Prior to starting any repairs or service on your water heater, please thoroughly read the Use and Care Manual provided with your water heater. If at any time you are unsure or uncomfortable about the suggested repair or service discussed herein, stop any activity and immediately contact a licensed plumber.
By from -
By from -
