Wholesale Distributors for Serrated Gasket for Cambodia Manufacturer

1.Structure

Serrated Gasket is made of machined flat metallic plate with waved or corrugated surface in 90 degree angle.

The Serrated Gasket with inner and outer rings or composite gasket attached with flexible graphite or Teflon sheet are available depending on the working location and requirement.

2.Characteristic

Serrated Gasket is an idea gasket used in low pre-tightening, the soft sealing surface avoid metal to metal touch, can be combined reliably and closely, protect flange not to be damaged. This kind of gasket is suitable to high pressure and high temperature location. Strong corrosion resistance, stable and reliable sealing function.

3.Gasket Typ

   Basic Type                                        With outer Ring

4. Working Environment

Working Temperature：~650℃

Working Pressure：6.4-16.0MP

Min. Pre-tightening：y=70MPa

Hinged Pipe Repair Clamp S size 290.0mm to suit the outside diameter pipe of 290mm. The hinged pipe repair clamp by ORBIT COUPLINGS in Australia is manufactured from 316 stainless steel with teflon coated stainless steel bolts. EPDM Sleeve/ Seal rated to 16 Bar / PN16 / 1600 KPa. The hinged repair clamp is an easy and simple to install pipe repair clamp which opens on a hinge, allowing the clamp to fully open and wrap around the pipe that you are wanting to repair. Simply fit the clamp over the crack or hole in the pipe, and tighten the bolts to the torque stated on the pipe clamp. The hinged repair clamp is available in sizes up to 350mm nominal bore. Above size 350mm then we recommend the Double Lock Clamp by ORBIT COUPLINGS.
For more information on pipe couplings and pipe repair clamps in Australia visit https://orbitcouplings.com.au/