OEM/ODM China PTFE Graphite Packing with Aramid Corner Supply to Vietnam
OEM/ODM China PTFE Graphite Packing with Aramid Corner Supply to Vietnam Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
20m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
What Is A PTFE Ring Gasket?
OEM/ODM China PTFE Graphite Packing with Aramid Corner Supply to Vietnam, The product will supply to all over the world, such as: , , ,
The SSI / GRANOR XJS® Expansion Joint System is a revolutionary new concept in expansion joint construction and rehabilitation, combining a tough, impact resistant wear resistant polymer joint nosing and a rapid two part cure joint sealing system with high movement capacity. The total expansion joint system, which is cold applied with minimum specialised equipment, is specifically designed to provide a watertight, chemically resistant seal to accommodate high traffic loads and to remain pliable in cold and warm temperatures.
By from -
By from -
