High Efficiency Factory Spiral Wound Gasket-RIR Wholesale to Korea
High Efficiency Factory Spiral Wound Gasket-RIR Wholesale to Korea Detail:
Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
Feature
Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.
Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface
Easy installation and handy use.
Excellent Sealability
Products Type
Technical Data Sheet
|
Product&Type |
Size（mm） |
Temperature(℃) |
Pressure（Mpa） |
|
Spiral Wound Gasket filled with Graphite
|
φ16~φ3200 |
(In Oxidizing Environment )-240~+550℃；(In non-Oxidizing Environment)-240~+870℃ |
(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa |
|
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
|
Spiral Wound Gasket filled with PTFE
|
φ16~φ3200 |
-200~+250℃ |
15 |
Application Area
The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.
Product detail pictures:
Related Product Guide:
Useful Tips For Installing The Teflon Envelope Gasket
Comparison of O-Ring Materials
High Efficiency Factory Spiral Wound Gasket-RIR Wholesale to Korea, The product will supply to all over the world, such as: , , ,
EMC Jolex skärmningspackningar ledande silikon O-ring tätning
EMI-packning shielding gasket skärmning ledande gummi
https://butserrubber.com
Butser Rubber are manufacturers of high quality rubber mouldings, O rings, gaskets and rubber bonded components for Aerospace, Automotive, Formula 1, Defence, Medical and General industry.
We have been in the rubber moulding industry for over 30 years and have expertise/experience in manufacturing precision rubber mouldings, precision gaskets and fabrications in natural, synthetic and spec polymers.
UK based factory facilities allow for items to be manufactured to meet ‘one off’ requirements and high volume production runs with short lead times and low transport costs.
By from -
By from -
