Good User Reputation for Carbon Fiber Packing Impregnated with PTFE to Mauritius Manufacturers

Short Description:

Diagonal braided to form a dense but pliable packing, each carbon fiber is pre-impregnated with PTFE, and re-impregnated during square braided. It is premium service packing for media of weak chemical corrosion and grains of particles exit. Technical Data Sheet   Rotating Reciprocating Valves Pressure 3Mpa 10Mpa 25Mpa Shaft Speed 15m/s rotary Temperature -200℃~+280℃ PH Range 2~12  Application Area Resist all the strong corrosive media and media with a...


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Good User Reputation for Carbon Fiber Packing Impregnated with PTFE to Mauritius Manufacturers Detail:

Diagonal braided to form a dense but pliable packing, each carbon fiber is pre-impregnated with PTFE, and re-impregnated during square braided. It is premium service packing for media of weak chemical corrosion and grains of particles exit.

Technical Data Sheet

 

Rotating

Reciprocating

Valves

Pressure

3Mpa

10Mpa

25Mpa

Shaft Speed

15m/s rotary

Temperature

-200℃~+280℃

PH Range

2~12

 Application Area

Resist all the strong corrosive media and media with a few crystal particles with the exception of the strong oxidizing agent polonium, chiefly used for the sealing of the centrifugal pump, column pump, mixer and valves.


Product detail pictures:

Good User Reputation for
 Carbon Fiber Packing Impregnated with PTFE to Mauritius Manufacturers detail pictures


Related Product Guide:
Comparison of O-Ring Materials
Useful Tips For Installing The Teflon Envelope Gasket

Good User Reputation for Carbon Fiber Packing Impregnated with PTFE to Mauritius Manufacturers, The product will supply to all over the world, such as: , , ,


  • A quick look at the Porsche 944 power steering rack, a Porsche 944 rack seal kit and where all the seal go. At the end we also look at how the pinion unit …



    Shifts much better with 10W30 installed.
    As usual it’s difficult to get oil back into the manual transmission without a proper pump. Jeep design makes it handy to just pour oil in with a longer hose while standing beside front fender.
    Used a 90 degree fitting from Lowes that has a garden hose male to a small ~1/2″ male end. Seals into the garden hose female. Just pour in until oil starts dripping into catch pan below Jeep, re-install plug. Careful not to over tighten plug, just needs to be snug, the plug doesn’t fasten anything..


    5 Stars By from -

    5 Stars By from -

    Related Products