Factory source manufacturing Carbon Fiber Packing Impregnated with PTFE to United Kingdom Importers
Factory source manufacturing Carbon Fiber Packing Impregnated with PTFE to United Kingdom Importers Detail:
Diagonal braided to form a dense but pliable packing, each carbon fiber is pre-impregnated with PTFE, and re-impregnated during square braided. It is premium service packing for media of weak chemical corrosion and grains of particles exit.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
3Mpa |
10Mpa |
25Mpa |
|
Shaft Speed |
15m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
Resist all the strong corrosive media and media with a few crystal particles with the exception of the strong oxidizing agent polonium, chiefly used for the sealing of the centrifugal pump, column pump, mixer and valves.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
Comparison of O-Ring Materials
Factory source manufacturing Carbon Fiber Packing Impregnated with PTFE to United Kingdom Importers, The product will supply to all over the world, such as: , , ,
This is a Tips & tricks video for fixing a leaking front main seal on Toyota 22R series engines (22R, 22R-E, 22RT-E, etc.) The main point of this video is to let …
Spears® Manufacturing installation video for the proper joint make up of threaded PVC fittings using Spears® Blue 75™ Thread Sealant or PTFE tape sealant. Threaded connections require application of a thread sealant that has been tested and approved for use with polyvinyl chloride (PVC), and/or chlorinated polyvinyl chloride (CPVC).
By from -
By from -
