factory Outlets for PTFE Packing with Aramid Corner to Greenland Manufacturer
factory Outlets for PTFE Packing with Aramid Corner to Greenland Manufacturer Detail:
PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.
Technical Data Sheet
|
Rotating |
Reciprocating |
Valves |
Pressure |
4Mpa |
15Mpa |
25Mpa |
Shaft Speed |
22m/s rotary |
||
Temperature |
-100℃~+280℃ |
||
PH Range |
2~12 |
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
Comparison of O-Ring Materials
factory Outlets for PTFE Packing with Aramid Corner to Greenland Manufacturer, The product will supply to all over the world, such as: , , ,
https://www.kingsbodyjewelry.com
Captive bead rings are a common style of body jewelry that can be really irritating to insert and remove if you have never done it before. Just make sure you line up one of the dimples of the bead with the edge of one side of the ring, and then push the second dimple right into the ring and you have done it. Not too hard but takes a bit of practice, especially on hard to reach places that you can’t see very well.
If you have any questions feel free to hit me up, I would be glad to help, and check out our website if you are interested in some awesome plugs and body jewelry. Talk to you soon.
chris
By from -
By from -