New Fashion Design for Reinforced Flexible Graphite Gasket Wholesale to Iran
New Fashion Design for Reinforced Flexible Graphite Gasket Wholesale to Iran Detail:
The reinforced flexible graphite composite gasket is composed of pressed metal sheet and flexible graphite grain after pressing and cutting.
1.Characteristic
Reinforced graphite gasket has perfect corrosion resistance, high &low temperature resistance, excellent elastic resilience, good strength. It can be cut into complex shape. Reinforced graphite gasket with inner &outer coating keeps all the excellent characteristics of itself, besides, it could be easily installed, disassembled, undamaged, meanwhile can prevent from medium corrosion, improve the pressure resistance.
2.Technical Data Sheet
|
Reinforced Material |
Pressure Resistance |
Temperature |
Elongation（%） |
Recovery（%） |
|
|
Oxidizing Environment |
Non-Oxidizing |
||||
|
CS Reinforce Sheet |
≥48 |
-10-450 |
-10-550 |
30-35 |
15-20 |
|
SS304,SS316 Reinforced Sheet |
≥48 |
-240-450 |
-200-600 |
30-35 |
15-30 |
|
SS304,SS316 Sheet |
≥48 |
-240-450 |
-200-600 |
30-40 |
10-15 |
|
Ss304, Mesh Sheet |
≥48 |
-240-450 |
-200-600 |
40-50 |
15-20 |
|
Reinforced Material |
Breathable (cm3/min) |
Leakage |
Seal Constant |
||
|
N2 m1/hr |
Bumming oil A |
“M” |
“Y” |
||
|
CS Reinforce Sheet |
<=0.8 |
30 |
<0.5 |
3.0 |
9000 |
|
SS304,SS316 Reinforced Sheet |
<=0.8 |
60 |
<0.5 |
2.5 |
4000 |
|
SS304,SS316 Sheet |
<=0.4 |
35 |
<0.5 |
2.0 |
900 |
|
SS304, Mesh Sheet |
≥1.0 |
70 |
<0.5 |
3.0 |
5000 |
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
Comparison of O-Ring Materials
New Fashion Design for Reinforced Flexible Graphite Gasket Wholesale to Iran, The product will supply to all over the world, such as: , , ,
This video shows the ATOM Flashcut dieless knife cutting machine nesting and cutting gasket sealing material.
Although this can be cut on any of the ATOM range of Flashcut’s, this is the general standard size bed for this application, giving the operator the ability to be unloading one half of the machine, relaod blank material and nest, whilst the second half of the machine is cutting. When the first zone is completed then the cutting beam will move over too the second half and restart, allowing the operator to be a continous production cycyle.
If you’ve ever tried to twist a cable with a drill, or attempted to identify conductors in a huge multi-conductor cable without labeling, you know how frustrating it can …
By from -
By from -
