High Quality Pall Ring Export to Surabaya

Pall Ring has features of low pressure drop, great flux, high efficiency.

Material: Stainless steel, carbon steel, aluminum, bronze, 304L, 316L, and other alloy, carbon seep aluminium.Strengthen polypropylene, strengthen nylon6, strengthen nylon66, strengthening PBT can also be requested by user.

Application: Used in all kind of separation, absorb, dis-absorb plants, constant decompress plants, compounding ammonia plant, decarbonization plant, desulfuration plant，separation of ethylbenzene, separation of isooctane/ methylbenzene.

Technical Data Sheet

NOTE: rear shaft seal is not covered in this video – this information can be found online. If you have a deep groove worn into the shaft from this seal, you may have to install the new one in a slightly different position to contact an undamaged part of the shaft to prevent leakage from the backside of the pump.

The MB re-seal kit only includes the front cover o-ring and rear shaft seal – if your pump continues to leak from the front cover after replacement of this while operating, the internal O-rings will be leaking. With time and heat they have all gone hard and brittle now anyway.The internal o-rings have to be sourced from the aftermarket. They are not available as a spare part from MB. They want the whole pump replaced in such case.

Also note, i suggest using something like silcon o-ring grease to allow easy installation of the internal o-rings. Oil on its own may allow the rings to bind and be cut, chipped or shaved, resulting in enormous leaks.