2017 China New Design PTFE Packing with Aramid Corner to Czech Republic Factory
2017 China New Design PTFE Packing with Aramid Corner to Czech Republic Factory Detail:
PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
22m/s rotary |
||
|
Temperature |
-100℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
What Is A PTFE Ring Gasket?
2017 China New Design PTFE Packing with Aramid Corner to Czech Republic Factory, The product will supply to all over the world, such as: , , ,
Sentinel Seal X Joint & Leak Sealer, which is applied externally, is a one component, ready to use, silicone sealant. It can be applied to screwed fittings, compression joints and gaskets to form a water and air tight seal. A well pasted cloth may be bound around burst and leaking pipes to form a temporary repair.
Pegasus Northwest waterjets two 8.5″ forged steel parts on their Jet Edge water jet cutting machine. Courtesy Jet Edge. Permalink: …
By from -
By from -
