Reasonable price for PTFE Packing with Aramid Corner to Mecca Factories
Reasonable price for PTFE Packing with Aramid Corner to Mecca Factories Detail:
PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
22m/s rotary |
||
|
Temperature |
-100℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
What Is A PTFE Ring Gasket?
Comparison of O-Ring Materials
Reasonable price for PTFE Packing with Aramid Corner to Mecca Factories, The product will supply to all over the world, such as: , , ,
Techspan supply a range of Hand-held tools for cutting of expanded polystyrene block materail. Idea for shaping, sculpting and cutting of polystyrene floor insulation materials and model making. These tools will also cut filter-media material and insulation foams, litrally cuts like a hot knife through butter. A range of blades are available to suit the various hot knife models.
Sealing Compound installation with setup for online injection
By from -
By from -
