Customized Supplier for PTFE Graphite Packing with Aramid Corner Supply to Honduras
Customized Supplier for PTFE Graphite Packing with Aramid Corner Supply to Honduras Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
20m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
What Is A PTFE Ring Gasket?
Comparison of O-Ring Materials
Customized Supplier for PTFE Graphite Packing with Aramid Corner Supply to Honduras, The product will supply to all over the world, such as: , , ,
LIQUI MOLY Oil Additive (#1011)
The MoS2 low-viscosity engine oil creates a heavy-duty lubricant film on all frictioning and sliding metal surfaces. It reduces friction, guaranteeing the aggregates run more smoothly. That produces these benefits: Significant fuel and oil saving, scientifically proven wear reduction, high reliability, antifriction properties.
Intended use:
Suitable for all commercial motor oils in petrol and diesel engines with and without diesel particulate filter (DPF). Tested safe with catalytic converters and turbochargers. Our dosage recommendation: add from 3 – 5 % to motor oil. For motorcycles with wet clutches, add maximum 2 % of the oil filling volume.
More information: https://www.liqui-moly.de/liquimoly/produktdb.nsf/id/en_1011.html?OpenDocument&land=GB&voilalang=e&voiladb=web.nsf
By from -
By from -
