Best quality and factory PTFE Graphite Packing with Aramid Corner Supply to Qatar
Best quality and factory PTFE Graphite Packing with Aramid Corner Supply to Qatar Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
Rotating |
Reciprocating |
Valves |
Pressure |
4Mpa |
15Mpa |
25Mpa |
Shaft Speed |
20m/s rotary |
||
Temperature |
-200℃~+280℃ |
||
PH Range |
2~12 |
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
O-Ring Sizes for Industrial Applications
What Is A PTFE Ring Gasket?
Best quality and factory PTFE Graphite Packing with Aramid Corner Supply to Qatar, The product will supply to all over the world, such as: , , ,
The aim of tightening a compression joint is to create a gas tight joint without compressing the olive too tight on the pipe by over tightening the nut as this will restrict flow through the pipe as the pipe will have been made internally smaller.
GAS IT and FES Autogas Ltd do not accept any liability from users following this video or information we provide.
We highly recommend getting a GAS IT Trained Dealer or Qualified Gas engineer to check your installation and fitment of GAS IT parts prior to filling and using it with LPG/ Autogas.
By from -
By from -