Short Lead Time for PTFE Packing with Aramid Corner Supply to Johor
Short Lead Time for PTFE Packing with Aramid Corner Supply to Johor Detail:
PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.
Technical Data Sheet
|
Rotating |
Reciprocating |
Valves |
Pressure |
4Mpa |
15Mpa |
25Mpa |
Shaft Speed |
22m/s rotary |
||
Temperature |
-100℃~+280℃ |
||
PH Range |
2~12 |
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
What Is A PTFE Ring Gasket?
Comparison of O-Ring Materials
Short Lead Time for PTFE Packing with Aramid Corner Supply to Johor, The product will supply to all over the world, such as: , , ,
https://www.officezone.com/aiehandc.htm – Hand sealers, sometimes called handheld bag sealers, are great to have for packaging and sealing plastic bags. What do you do if you bag has excess plastic? If you have a standard hand sealer, you have to cut it off using scissors. If you need to cut plastic off of a lot of bags throughout the day, scissors can be tedious. This is why you need to use a handheld bag sealer with a build in cutter. These AIE hand sealers all include a cutter and can be used to seal a wide variety of bags. These sealers range in sealing length from 8″ up to 16″ and produce sealing widths from 2mm up to 5mm, depending on the model. Using these handheld bag sealers is easy. Simply adjust the machine, place the open end of the bag into the sealer and pull the arm down. Once the sealing is complete, pull the cutter lever and slit off the excess plastic. These sealers are incredibly popular. Buy yours today!
By from -
By from -