Fast delivery for PTFE Filament Braided Packing for Bogota Importers
Fast delivery for PTFE Filament Braided Packing for Bogota Importers Detail:
PTFE filament packing is braided from pure PTFE filament yarn and impregnated with PTFE dispersion, it has the better internal structure, higher cross-sectional density and structural strength than traditional PTFE packing.
Technical Data Sheet
|
Rotating |
Reciprocating |
Valves |
Pressure |
3Mpa |
15Mpa |
25Mpa |
Shaft Speed |
12m/s rotary |
||
Temperature |
-200℃~+280℃ |
||
PH Range |
0~14 |
Application Area
Rotary and reciprocating plant in the food processing, pharmaceutical, special chemicals, and pulp and paper sectors.
Product detail pictures:
Related Product Guide:
What Is A PTFE Ring Gasket?
Comparison of O-Ring Materials
Fast delivery for PTFE Filament Braided Packing for Bogota Importers, The product will supply to all over the world, such as: , , ,
WidgetWorks Hobby Vacuum Formers and Thermoform Plastic Sheets are perfect for inventors, small businesses, and DIY hobbyists who want to make custom vacuum formed plastic parts. Use our Hobby Vacuum Formers and Thermoform Plastic Sheets along with your kitchen oven and a Shop-Vac vacuum cleaner to thermoform homemade plastic parts with results that rival expensive commercial machines. Make your own plastic prototypes, clamshell and blister packaging, custom molds, scale model parts, and movie props.
Hobby Vacuum Formers and Thermoform Plastic Sheets are available through our website:
www.WidgetWorksUnlimited.com
HOW TO VACUUM FORM IN 3 EASY STEPS
STEP 1: Secure your thermoform plastic between the Hobby Vacuum Former’s metal clamping frames with the provided spring clips. Attach your Shop-Vac (not included) to the vacuum former. Place your model on top of the vacuum formers perforated aluminum platen.
STEP 2: Place the thermoform plastic in your kitchen oven and watch as it begins to sag. When the plastic becomes soft, remove it from the oven. Align the metal clamping frames with the Hobby Vacuum Former’s guides and lower the plastic over your model.
STEP 3: The hot thermoform plastic forms an air tight seal around the edges of the aluminum vacuum platen. Vacuum pressure pulls the hot plastic down around the model. After cooling for a few seconds the thermoform plastic part hardens and is ready to be removed.
By from -
By from -