2017 China New Design PTFE Packing with Aramid Corner for Iceland Manufacturers
2017 China New Design PTFE Packing with Aramid Corner for Iceland Manufacturers Detail:
PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
22m/s rotary |
||
|
Temperature |
-100℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
O-Ring Sizes for Industrial Applications
Useful Tips For Installing The Teflon Envelope Gasket
2017 China New Design PTFE Packing with Aramid Corner for Iceland Manufacturers, The product will supply to all over the world, such as: , , ,
If the sliding door on your van is hard to open and close, or if it feels like the door of your van is stuck when you open and close it, you can fix the stuck door by oiling the rollers. The van in the video is a GMC Safari, which is the same as the Chevrolet Astro Van. Most minivans use a similar system.
To fix your van door and make it open smoothly, get some spray oil, like Tri-Flow and spray oil on all the rollers, top, middle, and bottom. Once the rollers on the stuck van door are oiled, the door will open smoothly.
By from -
By from -
