11 Years Manufacturer Carbon Fiber Packing Impregnated with PTFE to Norway Factories
11 Years Manufacturer Carbon Fiber Packing Impregnated with PTFE to Norway Factories Detail:
Diagonal braided to form a dense but pliable packing, each carbon fiber is pre-impregnated with PTFE, and re-impregnated during square braided. It is premium service packing for media of weak chemical corrosion and grains of particles exit.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
3Mpa |
10Mpa |
25Mpa |
|
Shaft Speed |
15m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
Resist all the strong corrosive media and media with a few crystal particles with the exception of the strong oxidizing agent polonium, chiefly used for the sealing of the centrifugal pump, column pump, mixer and valves.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
Useful Tips For Installing The Teflon Envelope Gasket
11 Years Manufacturer Carbon Fiber Packing Impregnated with PTFE to Norway Factories, The product will supply to all over the world, such as: , , ,
HOW TO REPAIR STUCK SPRINKLER HEADS USING EVERYDAY PETROLIUM JELLY (VASELINE) This is (sometimes) a short term fix (and cheaper) until you can buy a new one, but it does work well on dirty or a high calcified sprinkler and may be a long term fix I have tried all kinds of oils,silicon, and expensive Teflon and this does the best and it is cheap. Best of luck MBJREPORT.
Music made with Magix Premium music maker
By from -
By from -
