Factory Supplier for PTFE Packing with Aramid Corner for Mozambique Manufacturers
Factory Supplier for PTFE Packing with Aramid Corner for Mozambique Manufacturers Detail:
PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
22m/s rotary |
||
|
Temperature |
-100℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
O-Ring Sizes for Industrial Applications
Comparison of O-Ring Materials
Factory Supplier for PTFE Packing with Aramid Corner for Mozambique Manufacturers, The product will supply to all over the world, such as: , , ,
A&M HW100 fill valve leak repair.
If you have a leaky cylinder you should contact A&M, who should repair it under warranty.
If you find your A&M cylinder is leaking from the fill port then you can either replace the O ring on the little plunger inside the valve or you can convert it to a simple M10* countersunk bolt with an O ring seal. The O rings and bolts can be bought on eBay or your local DIY store.
*It has come to my attention that A&M use a number of different sizes of bolts in their fill valves so you will need to measure yours to make sure you are buying the correct size bolt and O ring.
www.xtxair.com
If you have a leaky cylinder you should contact A&M, who should repair it under warranty.
By from -
By from -
