13 Years Manufacturer PTFE Graphite Packing with Aramid Corner to Malawi Manufacturer
13 Years Manufacturer PTFE Graphite Packing with Aramid Corner to Malawi Manufacturer Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
20m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
What Is A PTFE Ring Gasket?
A Look at the Molded Gasket
13 Years Manufacturer PTFE Graphite Packing with Aramid Corner to Malawi Manufacturer, The product will supply to all over the world, such as: , , ,
Email: AIECO.Edward@gmail.com if you have any questions or would like more information.
The Impulse sealer with Cutter (C series) are all equipped with a sliding blade that cuts excess material a quarter inch from the seal. The Impulse Sealer with Cutters is excellent for sealing poly-tubing and plastic materials. Available in seal widths of 2mm and 5mm. Perfect for applications where roll bags are used.
By from -
By from -
