Trending Products Reinforced Flexible Graphite Gasket to Auckland Factory
Trending Products Reinforced Flexible Graphite Gasket to Auckland Factory Detail:
The reinforced flexible graphite composite gasket is composed of pressed metal sheet and flexible graphite grain after pressing and cutting.
1.Characteristic
Reinforced graphite gasket has perfect corrosion resistance, high &low temperature resistance, excellent elastic resilience, good strength. It can be cut into complex shape. Reinforced graphite gasket with inner &outer coating keeps all the excellent characteristics of itself, besides, it could be easily installed, disassembled, undamaged, meanwhile can prevent from medium corrosion, improve the pressure resistance.
2.Technical Data Sheet
|
Reinforced Material |
Pressure Resistance |
Temperature |
Elongation（%） |
Recovery（%） |
|
|
Oxidizing Environment |
Non-Oxidizing |
||||
|
CS Reinforce Sheet |
≥48 |
-10-450 |
-10-550 |
30-35 |
15-20 |
|
SS304,SS316 Reinforced Sheet |
≥48 |
-240-450 |
-200-600 |
30-35 |
15-30 |
|
SS304,SS316 Sheet |
≥48 |
-240-450 |
-200-600 |
30-40 |
10-15 |
|
Ss304, Mesh Sheet |
≥48 |
-240-450 |
-200-600 |
40-50 |
15-20 |
|
Reinforced Material |
Breathable (cm3/min) |
Leakage |
Seal Constant |
||
|
N2 m1/hr |
Bumming oil A |
“M” |
“Y” |
||
|
CS Reinforce Sheet |
<=0.8 |
30 |
<0.5 |
3.0 |
9000 |
|
SS304,SS316 Reinforced Sheet |
<=0.8 |
60 |
<0.5 |
2.5 |
4000 |
|
SS304,SS316 Sheet |
<=0.4 |
35 |
<0.5 |
2.0 |
900 |
|
SS304, Mesh Sheet |
≥1.0 |
70 |
<0.5 |
3.0 |
5000 |
Product detail pictures:
Related Product Guide:
What Is A PTFE Ring Gasket?
Comparison of O-Ring Materials
Trending Products Reinforced Flexible Graphite Gasket to Auckland Factory, The product will supply to all over the world, such as: , , ,
Available to buy at: https://www.tradecounterdirect.com/sea…
Henkel Loctite 55 Pipe Sealing Cord is a new, faster, more versatile pipe sealant which out-dates traditional tapes and hemp/pastes combinations.
Impregnated with paste to give a high pressure seal to your joints. Loctite 55 should be wound a few times around the thread and once the joint has been closed tightly, will withstand pressures in the region of 40 bar.
Use for cold and hot water applications, as well as potable water or gas. Use on copper, steal or plastic pipe systems.
Loctite 55 is resistant to:
Hot and cold drinking water
Hot water
Domestic gas
Natural Gas
Liquefied gas in gaseous state
Gas condensates
Compressed air
Industrial oils (contains silicone oil.)
Not suitable for heating oil or fuels – Use instead Loctite 577.
Complies with EN 751-2 and has DVGW approval. Certifies to ANSI/ NSF Standard 61
By from -
By from -
