OEM/ODM Factory for Reinforced Flexible Graphite Gasket to Anguilla Factories
OEM/ODM Factory for Reinforced Flexible Graphite Gasket to Anguilla Factories Detail:
The reinforced flexible graphite composite gasket is composed of pressed metal sheet and flexible graphite grain after pressing and cutting.
1.Characteristic
Reinforced graphite gasket has perfect corrosion resistance, high &low temperature resistance, excellent elastic resilience, good strength. It can be cut into complex shape. Reinforced graphite gasket with inner &outer coating keeps all the excellent characteristics of itself, besides, it could be easily installed, disassembled, undamaged, meanwhile can prevent from medium corrosion, improve the pressure resistance.
2.Technical Data Sheet
|
Reinforced Material |
Pressure Resistance |
Temperature |
Elongation（%） |
Recovery（%） |
|
|
Oxidizing Environment |
Non-Oxidizing |
||||
|
CS Reinforce Sheet |
≥48 |
-10-450 |
-10-550 |
30-35 |
15-20 |
|
SS304,SS316 Reinforced Sheet |
≥48 |
-240-450 |
-200-600 |
30-35 |
15-30 |
|
SS304,SS316 Sheet |
≥48 |
-240-450 |
-200-600 |
30-40 |
10-15 |
|
Ss304, Mesh Sheet |
≥48 |
-240-450 |
-200-600 |
40-50 |
15-20 |
|
Reinforced Material |
Breathable (cm3/min) |
Leakage |
Seal Constant |
||
|
N2 m1/hr |
Bumming oil A |
“M” |
“Y” |
||
|
CS Reinforce Sheet |
<=0.8 |
30 |
<0.5 |
3.0 |
9000 |
|
SS304,SS316 Reinforced Sheet |
<=0.8 |
60 |
<0.5 |
2.5 |
4000 |
|
SS304,SS316 Sheet |
<=0.4 |
35 |
<0.5 |
2.0 |
900 |
|
SS304, Mesh Sheet |
≥1.0 |
70 |
<0.5 |
3.0 |
5000 |
Product detail pictures:
Related Product Guide:
What Is A PTFE Ring Gasket?
A Look at the Molded Gasket
OEM/ODM Factory for Reinforced Flexible Graphite Gasket to Anguilla Factories, The product will supply to all over the world, such as: , , ,
First, I sanded the cracked area so the epoxy would adhere to the tank better. After applying the epoxy, I let it cure overnight for 12 hours. However, I noticed a spot that I had missed so I applied more quick steel the following morning.
This is the first time I’ve done this so I’m crossing my fingers hoping it works. I’ve seen other videos where people use soldering irons before applying the epoxy however, I did not take that approach because my tank was full of fuel. I did want to risk catching something on fire.
By from -
By from -
