Hot sale Factory Spiral Wound Gasket-R Supply to Liberia
Hot sale Factory Spiral Wound Gasket-R Supply to Liberia Detail:
Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
Feature
Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.
Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface
Easy installation and handy use.
Excellent Sealability
Products Type
echnical Data Sheet
|
Product&Type |
Size（mm） |
Temperature(℃) |
Pressure（Mpa） |
|
Spiral Wound Gasket filled with Graphite
|
φ16~φ3200 |
(In Oxidizing Environment )-240~+550℃；(In non-Oxidizing Environment)-240~+870℃ |
(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa |
|
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
|
Spiral Wound Gasket filled with PTFE
|
φ16~φ3200 |
-200~+250℃ |
15 |
Application Area
The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
Useful Tips For Installing The Teflon Envelope Gasket
Hot sale Factory Spiral Wound Gasket-R Supply to Liberia, The product will supply to all over the world, such as: , , ,
Vetaphone and Coating Plasma Industrie demonstrates the EASI-Plasma system for surface treatment of films and foils.
Vetaphone’s EASI-Plasma system works on the same principles as a Corona system, but by replacing the oxygen with gases or monomers, the EASI-Plasma can create new and innovative abilities on the film surface. The EASI-Plasma system does this with a significantly lower amount of consumables than any other solution on the market.
Benefits of EASI-Plasma
• Higher and longer lasting dyne values
• Replace your primer or coating unit with a cheaper solution
• Nano-coating thickness only 5-50 nm
• Anti-fog
• Hydrophilic or Hydrophobic surface
• A large variety of other abilities
EASI-Plasma provides a wide range of benefits for the coating and converting processes; such as nano-coating, anti-fog properties, low surface ageing and higher dyne levels.
EASI-Plasma reduces production costs by eliminating the need to use expensive primer, so the cost per m2 is reduced significantly. As the layer of primer is not needed, it is possible to produce much thinner film.
Similar advantages are present, when using the EASI-Plasma for nano-coating. By making the nano-coated layer only 5-50 nm thick, the EASI-Plasma brings down the cost per m2 and creates possibilities to produce new innovative thinner films.
All in all there is a great potential for saving resources and creating new surface abilities by employing EASI-Plasma.
Website: https://www.hifabrics.com/ Email: info@hifabrics.com Incorporated in the year 2009, Shanghai DEME International Trade Co,.Ltd is a manufacturer and …
By from -
By from -
