Factory source manufacturing Aramid Fiber Braided Packing with PTFE Impregnated to Croatia Factory

Aramid fiber PTFE packing is braided from high quality Dupont aramid fiber with PTFE impregnated and lubricant additive. This packing can bear higher pressure applications than other types of braided packing. Due to its steel like strength, this yearn can used separately or as back up rings with other types of packing. This packing has been developed to replace asbestos packing for pump systems. It covers all the service ranges which asbestos packing provides and even much better.

Technical Data Sheet

Application Area

It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.

www.TinsleyCompany.com for more information and price quotes.

Semi-auto box filling system fills empty boxes with chopped metal fibers by weight. These fibers are added to concrete to increase strength.

Metal fibers for filling the boxes are delivered via belt conveyor to a surge hopper and vibratory feeder. When empty box is placed on the filling scale by operator, the system is started. The vibratory feeder, operating at full flow, conveys the metal fibers into the empty box. During box filling, the vibratory densifier is activated to denisify the material in the box. When box is 90% filled, the vibratory feeder slows to a “dribble rate” and stops when the box reaches target weight. Densifier stops and filled box is conveyed to a packaging station.

All controls are prewired and pre-piped. Client brings power and compressed air to the control enclosure. Controller uses digital scale for weighing and PLC to control all other functions including activation of the densifier. Controller allows for adjustment of filled box weight, full flow and dribble flow rates, and densifier timing.