Factory Cheap PTFE Graphite Packing with Aramid Corner to Chile Factory

PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.

Technical Data Sheet

 Application Area

It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.

Mechanical Systems’s Fully Automatic Pet Bottle Blowing Machine ,equipment is one high precision and speedy to make, bottles used for Water, Carbonated drinks, Hot fill juices, Pharmaceuticals & cosmetics , but also can used for different bottle shapes filling in one machine. With change over parts. Greatly improve the equipment usage
scope. Production capacity is from 2,000 bottles per hour to16,000 bottles per hour can be chosen by customers. Main-frame machine adopts frequency conversiontiming motor, convenient adjustment speed within throughput.

We are making 2 cavity, 4 cavity, 6 cavity Blow Machines fully auto as well as semi auto 2 cavity with auto drop feature as well.

C. Machine Features:
C.1. Stably performance with advanced PLC.
C.2. Conveying preforms automatically with conveyor.
C.3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheated.
C.4. High adjustability to enable the preheated to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheated with an automatic thermostatic apparatus.
C.5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
C.6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
C.7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
C.8. Strong clamping force with high pressure and double crank links to lock the mold.
C.9. Two ways of operating: automatic and manual.
C.10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
C.11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
C.12. Contamination is avoided for the bottle body.
C.13. Ideal effect of the chilling with the chilling system.
C.14. Easy installation and starting
C.15. Low rejection rate: less than 0.2 percent.

Mechanical Systems
302, HSIDC, Industrial Growth Centre, Saha
Ambala, Haryana (India)
Pin code: 133104
PH No.91-9466610761 ,9215477900, 8199944430, whatsapp/ Viber/ imo 0091-9466610761
Skype: mechsys2004
Email: mechsys2004@yahoo.com, mechsys@rediffmail.com
www.filling-machines.co.in, www.mechanicalsystems.in