Super Purchasing for PTFE Gasket to Romania Factory

PTFE gasket is manufactured by molding method with PTFE granular resin. Compared with other plastic, PTFE has a superior properties against chemicals and temperature. Because of such excellent properties, PTFE gasket has a wide application as a sealing material.

Technical Data Sheet

Application Area

As a sealing material, PTFE gaskets can be used in flange joint of various equipments and pipes in chemical industry, food producing industry, medicine industry and so on. It can bear the most bitter chemical medium, and has good anti-creeping performance. The unloaded operating temperature range is -180~+260℃.

https://www.durafix.com.mx Soldar aluminio ahora es mas facil que nunca! desde una lata hasta una placa, solo requieres un soplete de gas propano, mapp, acetileno etc. en segundos podras soldar piezas de aluminio, cobre, bronce, lamina galvanizada.

Durafix, crea una fuerte union mas resistente que el metal base, libre de porosidades y residuos, con ua apariencia similar al aluminio, no requiere fundente ni el uso de gases o maquinas especiales.
============================
Tensile Strength, lbs/sq. in.=47,000
Compression Strengt, lbs/sq. in.=60,000 – 75,000
Shear Strengt, lbs/sq. in.= 34,000
Charpy Impact Str, lbs/sq. in.= 4 ft/lb to break 1/4″ bar
Hardness (Brinell)= 100
Ductility Good= Good
Melting Point= 732°F – 390°C
Specific Gravity = 6.7
Density (lbs/cu. in.)= 0.25
Elongation (in 2″)= 3%
Coefficient of Linear Expansion= 15.4×10-6/°F
Electrical Conductivity= 24.9% of Cu
Thermal Conductivity= 0.24 cal/cu.cm/°C
============================
Entrega inmediata en todo Mexico.

============================
Music track: Adam Michaels Is There Anybody Out There
Powered by Freeplay Music