High reputation for Rubber Gasket/Washer Supply to United States
High reputation for Rubber Gasket/Washer Supply to United States Detail:
Rubber is the most cost-effective material to use where temperature and pressures are low and the chemical environment is mild. Different elastomers offer different mechanical and chemical properties. Cloth&metal inserted materials are better able to handle movement and high compression loads.
Technical Data Sheet
Material |
NR, NBR,SBR,BR,IR,CR,EPDM,VITON(FKM),SIR,SILICONE |
Hardness |
Silicone about 50~90 shore A, others about 60~90 shore A |
Temperature Resistance |
-40~+300℃ |
Technology |
Hot pressing or injection Molding |
Second Processing |
Vulcanizing/Deburring/silk-screen/Carving/Printing |
Quality Control |
Internal QC control |
Product Feature |
Oxidation, chemical, oil, acid, alkali, weather resistance |
Colorful, anti-aging, good flexibility,good elasticity |
Application Area
l Electron Components
l Medical Equipment
l Home Appliance
l Mechanical Equipment
l Office Facilities
l Aviation
l Construction
l Automobile
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
O-Ring Sizes for Industrial Applications
High reputation for Rubber Gasket/Washer Supply to United States, The product will supply to all over the world, such as: , , ,
NOTE: rear shaft seal is not covered in this video – this information can be found online. If you have a deep groove worn into the shaft from this seal, you may have to install the new one in a slightly different position to contact an undamaged part of the shaft to prevent leakage from the backside of the pump.
The MB re-seal kit only includes the front cover o-ring and rear shaft seal – if your pump continues to leak from the front cover after replacement of this while operating, the internal O-rings will be leaking. With time and heat they have all gone hard and brittle now anyway.The internal o-rings have to be sourced from the aftermarket. They are not available as a spare part from MB. They want the whole pump replaced in such case.
Also note, i suggest using something like silcon o-ring grease to allow easy installation of the internal o-rings. Oil on its own may allow the rings to bind and be cut, chipped or shaved, resulting in enormous leaks.
By from -
By from -